User Menu - Vortice Reg Depuro Plus Notice D'emploi Et D'entretien

ENGLISH

User Menu

(Long press MOD key to enter). Using the options in this menu you can set the operating parameters of the
device. The menu presents the following options in sequence one by one (in the menu use the MOD key to
select/enter/confirm, the UP/DOWN keys to scroll/increase/decrease/select, the ON/OFF key to exit):
HOUr
PrOG
iD
PAr
r F7
r PF
r H14
rESEt
Date setting (HOUr)
Use the MOD key to select the data to be changed (day/time) and set the desired value using the UP/DOWN
keys.
Press ON/OFF to exit and return to the main screen.
WE
Hourly programming setting (PrOG)
NOTE: during the hourly programming mode the regulator does not communicate on the serial communication
channel.
For each day of the week you can set a period 1 and a period 2, with start time and end time. The time slot
that is not included in periods 1 and 2 is automatically assigned to the "reduced" period (e.g. night). It is then
possible to set the speeds of period 1, 2, and reduced.
Using the MOD and UP/DOWN keys set the programming from Monday to Sunday, according to the sequence:
(Monday) - Period 1 start time - Period 1 end time - Period 2 start time - Period 2 end time
.....
MON MON MON MON
(Sunday) - Period 1 start time - Period 1 end time - Period 2 start time - Period 2 end time
Period 1 speed
Period 2 speed
Reduced period speed
It is possible to copy the previous day's programming to the current day, with the long press of ON/OFF.
It is possible to deactivate a period by setting the time with the value "-".
Press ON/OFF to exit and return to the main screen.
30