Vasco EnergyPlus ENY–P1 Manuel D'installation, Utilisation Et Entretien page 178

English
6. After programming the first day, press "M"
to move to the next day; it is possible to
extend the program created for the first day
to the other days of the week
extend):
DAY
P
If you select "YES" the program is auto-
matically copied to the other days of the week;
if instead you select "no", you can then use
the TOUCH PAD to select a day and repeat
the programming process.
Weekly Program P.....
DAY
TIME
0 – 1 1 – 2 2 – 3 3 – 4
SPEED
Low
Nominal
DAY
TIME
0 – 1 1 – 2 2 – 3 3 – 4
SPEED
Low
Nominal
Weekly Program P.....
DAY
TIME
0 – 1 1 – 2 2 – 3 3 – 4
SPEED
Low
Nominal
DAY
TIME
0 – 1 1 – 2 2 – 3 3 – 4
SPEED
Low
Nominal
IMPORTANT!: complete the table(s) with the configuration of the program created.
active status
inactive status
(Xtend=
+
-
4 – 5 5 – 6 6 – 7 7 – 8 8 – 9 9 – 10
4 – 5 5 – 6 6 – 7 7 – 8 8 – 9 9 – 10
4 – 5 5 – 6 6 – 7 7 – 8 8 – 9 9 – 10
4 – 5 5 – 6 6 – 7 7 – 8 8 – 9 9 – 10
In the standard configuration with the
"mstop=OFF" parameter, the selection
of the former speed within the custo-
mized programme corresponds to the
fans stop. In case you want to modify
the OFF setting so that corresponds
to the holding minimum flow rate, see
"PAr" parameters menu and modify the
"mstop" parameter settings.
NOTE: once created, the free weekly
programs can be modified as necessary
at any time.
Monday - Friday
10 – 11 11 – 12 12 – 13 13 – 14 14 – 15 15 – 16
Saturday - Sunday
10 – 11 11 – 12 12 – 13 13 – 14 14 – 15 15 – 16
Monday - Friday
10 – 11 11 – 12 12 – 13 13 – 14 14 – 15 15 – 16
Saturday - Sunday
10 – 11 11 – 12 12 – 13 13 – 14 14 – 15 15 – 16
178
16 – 17 17 – 18 18 – 19 19 – 20 20 - 21 21 - 22
16 – 17 17 – 18 18 – 19 19 – 20 20 - 21 21 - 22
16 – 17 17 – 18 18 – 19 19 – 20 20 - 21 21 - 22
16 – 17 17 – 18 18 – 19 19 – 20 20 - 21 21 - 22
22 - 23 23 - 24
22 - 23 23 - 24
22 - 23 23 - 24
22 - 23 23 - 24