Vasco EnergyPlus ENY–P1 Manuel D'installation, Utilisation Et Entretien page 177

Creation of the free weekly program:
Programs P5-P6-P7-P8.
It is possible to create 4 weekly programs
at will, according to your habits and needs.
Proceed as follows:
1. Turn on the appliance at the ON/OFF key.
2. Press the ON/OFF and "M" Menu keys at
the same time.
3. Use the TOUCH PAD to select the installer
menu .
Press the Enter key to confirm
4. Select the symbol "P" and confirm
Now select the first free program to be
created from among P5 - P6 - P7 o P8.
Press the Enter key to confirm
NOTE: There is a "Reset" function, that al-
lows to cancel the pre-existing program on a
specific day, before to set up a new function.
DAY
P
5 . Once the program number is selected,
the programming procedure begins:
- enter the day of the week;
- enter the desired speed for the first time
slot.
NOTE: the first time slot starts at 00:00.
Use the TOUCH PAD to choose between the
4 speeds.
The Display will show the fan settings
according to the selection.
- enter the end time of the first time slot;
- go to the next time slot and repeat the
programming operation;
- the maximum number of time slots for
each day is 8.
.
.
+
-
177
P
P
DAY
P
DAY
P
DAY
P
DAY
P
DAY
P
DAY
P
English
+
-
+
-
+
-
+
-
+
-
+
-
+
-