Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

CAUTION:
self or bystanders.
Your blower is fitted with a 2 speed ON/OFF switch located
on the top of the power head handle
To switch the blower ON, slide the ON/OFF
forward to position 1 as shown in Fig. L.
To operate blower in high speed, slide the ON/OFF
switch forward to position 2 as shown in Fig. L.
To switch the blower off, slide the ON/OFF
back as shown in Fig. F.
Fig. F
Use (Fig. G)

CAUTION:
self or bystanders.

CAUTION:
hearing protection. Wear a filter mask if the operation
is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
Install the battery pack
 7 
Hold the blow tube approximately 7 inches (180 mm)
above the ground, turn the blower ON and using a
sweeping motion from side to side, advance slowly
keeping the accumulated debris/leaves in front of you
as shown in Fig. G.
Fig. G
8
Do not point unit discharge at
5
.
1
switch
1
switch
1
Do not point unit discharge at
Always wear safety glasses and
into the tool handle.
MAINTENANCE

WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Cleaning

WARNING:
air vents with clean, dry air at least once a week. To
minimize the risk of eye injury, always wear ANSI Z87.1
approved eye protection when performing this.

WARNING:
harsh chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.

WARNING:
POUR OR SPRAY WATER ON THE TOOL IN AN ATTEMPT
TO CLEAN.
Use only mild soap and a damp cloth to clean the tool.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Do not store the tool on or adjacent to fertilizers or
chemicals. Such storage can cause rapid corrosion of the
metal parts.
iMPORTAnT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always
using identical replacement parts.

Accessories


WARNING:
those offered by BLACK+DECKER, have not been tested
with this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
1–800–544–6986.
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
To reduce the risk of
Blow dirt and dust out of all
Never use solvents or other
SHOCK HAZARD. DO NOT
Since accessories, other than

Publicité

Table des Matières
loading

Table des Matières