Description; Important Features - Greenlee GATOR EK622CVX Mode D'emploi

Description

Greenlee Insulated Battery-Powered In-Line Crimper is
a hand-held, self-contained crimping tool intended to
crimp copper and aluminum cable with KC22-type,
KA22-type, and W-type dies.
This tool is insulated and will provide a secondary
protection up to 1000 Volts when used with appropriate
Personal Protection Equipment and safety procedures
and in accordance with this manual.
The tool has Bluetooth connectivity and an
®
LCD screen.
All specifications are nominal and may change as
design improvements occur.
These tools are protected by U.S. Patent Nos.
6,276,186, 6,401,515, 6,718,870, 7,086,979, and
7,254,982.
Patent pending.
Greenlee Tools, Inc.
Gator Insulated Battery-Powered In-Line Crimper
®
7

Important Features

• The tool incorporates an automatic retraction, that
returns the ram to the starting position when the
maximum force is achieved.
• The tool is equipped with a special brake, that
stops the forward motion of the ram when the trigger
is released.
• The crimping head has been designed to rotate
around the longitudinal axis in order to gain the
best access to tight corners and other difficult
working areas.
• This tool is equipped with a pressure sensor that can
help alert the user of an incomplete crimp.
• If the tool is manually retracted before completion of a
crimp, the red LED and an audible beep will be active
for 2 seconds.
• If the tool is unable to reach the required crimp force,
the red LED, work light, and an audble beep will pulse
until after the trigger is released.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070