Tool Description; Important Features; Specifications - Greenlee ESG105LXR Mode D'emploi

Tool Description

The Remote Cable Cutter with End-Position Blade
and Wireless Remote is designed to allow cutting in
two profiles, handheld and remote. It is intended to
cut the following:
• ESG105LXR: Multi-Phase Cable up to 4-1/8" (105
mm) in diameter. This tool is intended to cut most
low- and medium-voltage stranded copper and
aluminum cable as well as lead or soft steel armored
cable found on job sites.
This tool is not intended for use on EHS guy wire, Steel
Rod, Steel Cable or ACSR cableThe tool is protected by
U.S. Patent No. 6,206,663, 6,276,186, 6,401,515, and
6,718,870. Patent pending.

Important Features

• Two usage profiles, traditional Handheld and Remote
• Remote operation allows the operator to be
physically separated from the cutting tool
when making a cut. This feature is useful for
keeping the operator out of arc flash range when
cutting a cable where it is uncertain the line is
de-energized.
• The remote is equipped with a light and sound
signal to inform the user when the blade is
moving and when the cut has been completed.
• Bluetooth connectivity to the Greenlee I-Press App
®
Bluetooth is a registered trademark of BLUETOOTH SIG, Inc.
• OLED screen for a clear readout of tool information.
• An electric brake that stops the forward motion of the
blade when the remote trigger is released.
• A retract button controlling a Mag-Lock Release
Solenoid to retract the blade at any time in remote
mode.
• The tool incorporates an automatic retraction that
returns the blade to the starting position when the cut
is finished in handheld mode.
• The cutting head has been designed to rotate 350°
around the longitudinal axis in order to gain the best
access to tight corners and other difficult working
areas.
52087760 REV 0

Specifications

ESG105LXR Cutting Tool
Length: ..................................................24.4" (620 mm)
Width: ......................................................3.00" (76 mm)
Height (With battery): ............................14.6" (371 mm)
Weight (With battery): ..........................22.3 lb (10.1 kg)
Cutting Capacities:
Max. Cable Cutting Diameter: ............. 4-1/8" (105 mm)
Cable Materials: .....................Multi-phase cable copper,
aluminum, lead armored, and soft steel armored cable
Not intended for use on EHS guy wire, Steel Rod,
Steel Cable or ACSR cable.
This tool is not intended for use in marine
applications.
Operating Temperature Range:...................4 °F to 104 °F
Tool Battery: ................ 18 V MAKITA
Remote Battery: ............................................ AA (LR03)
All specifications are nominal and may change as
design improvements occur.
© 2020 Greenlee Tools, Inc.
Remote Cable Cutter
(-20 °C to 40 °C)
LXT Lithium ion
® ®
7