Napoleon Acies Série Manuel Du Propriétaire page 24

maintenance
EN
Slide GGA into the appliance until outer glass panel makes contact with upper gasket. GGA will 'click'
3.
into safety clips when secure. If GGA does not engage with safety clips, an adjustment may be required.
Before attempting an adjustment, check that the GGA was fully sealed when reinstalled. Adjustment
would have been made during installation. If adjustment is still required, contact an authorized dealer or
qualified technician.
Loosen screws and slide in direction to ensure safety clip is engaged while GGA is touching top gasket.
4.
24
W415-1713 / A / 08.27.18
Heat Rail
(with Gasket)
Safety clip