Napoleon Acies Série Manuel Du Propriétaire page 23

6.3.2 installing your GGA (LVX models only)
WARNING
!
• Allow appliance to cool completely before proceeding.
note:
If necessary, removing the door trim can make it easier to adjust GGA. Reinstall door trim when finished.
important:
The GGA is supplied with 6 screws that provide slight up/down and tilt adjustment to align glass to finishing
material. If the top of your GGA is not flush to the heat rail (with gasket) on both ends and/or requires an
adjustment, please contact your authorized dealer.
Fully extend door mounting brackets of appliance. Carefully place GGA onto supports.
1.
Keep brackets tight against GGA and install using 4 screws and washers (provided).
2.
Heat Rail
(with Gasket)
maintenance
23
W415-1713 / A / 08.27.18
EN