Understanding Your M1800I/ M2800I Energizer Controller - Gallagher M1800i Notice D'installation

Gallagher 3E3084 M1800i M2800i 110v Energizer User Manual
UNDERSTANDING YOUR M1800i/ M2800i
ENERGIZER CONTROLLER
Current Display
Shows the amount of load on the
energizer / fence zones
Status LED
Provides quick
indica on of the
fence status
Zone
Indicators
Displays which
energizer /
earth zones are
opera ng and if
they are in alarm
Se ngs bu ons
Change alarm levels and
energizer output voltage
Status LED
Green
Red
Flashing Red
Quickscan Bargraph
The Quickscan bargraph gives quick visual indica on of the energizer output voltage.
Each bar illuminated represents approximately 1KV output.
Green Segments
Yellow Segments
Red Segments
Voltage Display
Shows energizer / earth / fence zones voltage
Standby bu on
Turns the energizer pulses
on and off
The energizer and fence are opera ng normally
The energizer has detected a fault. Check the LCD screen to
determine where the problem is.
The energizer output voltage is low.
Your fence is performing well. No a en on is required.
Your fence is under some load but is s ll delivering an
eff ec ve shock.
Your fence is under heavy load and requires maintenance.
Quickscan
Bargraph
Gives fast visual
indica on of fence
voltage
Zone Indica on
Arrow
Highlights which
energizer / earth
zone is being shown
on the main display
Naviga on Bu ons
View energizer / earth zones
to see zone performance
9