Canon imageFORMULA DR-C130 Guide De Configuration page 8

DR-C130_SG.fm Page 7 Friday, March 16, 2012 8:54 AM
Scanning
Use CaptureOnTouch to verify that you can perform the scanning operation.
Open the feed tray gently.
1
Press the scanner's Start button.
4
Push the feed selection lever up
2
(Normal mode).
The scan result is displayed on
5
the CaptureOnTouch screen.
This completes setup.
7
Load the scan document with its
3
backside facing forward, and
adjust the paper guides to the
width of document.
Click [Next] and specify how to
6
save the scan results.
For details on the operation of
CaptureOnTouch, see the User
Manual.