Télécharger Imprimer la page

Extraflame ISABELLA Instructions De Montage page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

This kit allows to evacuate the combustion fumes laterally instead of from the rear as in the standard
version. For transformation follow the points below.
1.
First of all remove the upper ceramic cover to prevent its breakage during the various operations.
2.
Proceed by removing the right rear side by taking out the 3 black self-threading screws as illustrated
in figure 1.
3.
Also remove the galvanised back-piece by loosening the 6 black self-threading screws that support
it as illustrated in figure 2.
figure 1
4.
remove the plastic strip that fixes the cables to the corner, see figure 3 and then strap the cables
separately to the corner as illustrated in figure 4.
figure 3
5.
At this point take the curved unit supplied in the kit and introduce it using a rotary movement as
illustrated in figure 5. It is very important to ensure that the curved unit is completely inserted into the
auger feed shell, see figure 6.
figure 5
figure 2
figure 4
ENGLISH
figure 6

Publicité

loading

Ce manuel est également adapté pour:

Rosy