Publicité
Les langues disponibles
Les langues disponibles
6.
Now to fix the lateral curved unit in a safe way it is necessary to use the squarer and the two steel
straps supplied:
a.
Fix the connection bracket to the right rear corner using the 2 black self-threading screws supplied
as illustrated in figures 7 and 8. During this operation ensure that all cables run in the space between the
connection racket and the corner as shown by the arrow in figure 9.
b.
Use the steel straps to anchor the curved unit to the stove structure: the straps must pass through
the holes in the connection bracket (see figure 7) and wrap around the pipe as illustrated in figure 10.
figures 7
7.
Fix the new side using the 3 black self-threading screws supplied: when carrying out this operation,
pay attention to correctly join (indent - fold) the rear side with the front side in order to align the fume
escape pipe with the hole in the side.
figure 9
ENGLISH
figure 10
Publicité
