Disposal - Genius NicerDicer Plus Mode D'emploi

Cleaning the blade inserts
Self-cleaning function

7 Disposal

Note: Some types of fruit and vegetables can stain the plastic parts (e.g. beets). Frequent cleaning of
the collecting container in a dishwasher can affect the material's transparency. This is normal and not
a cause for concern; it does not limit the functionality.
In the event that the product and/or accessories can no longer be used, they should be disposed of with
the household rubbish. It can be disposed of by the municipal waste management services.
The packaging material can be recycled. Dispose of the packaging in an environmentally
friendly way and take it to your recycling site.
If you have any questions about the device or spare parts/accessories, please contact your local retailer.
Instruction Manual
When you're cleaning the product, never touch the side with the
sharp blades.
If food residue gets stuck between the blades, turn the sharp side
down and carefully remove them with the cleaning brush or a dish
washing brush.
To clean the built-in pin block, press the 'Push' button on the top of
the cutter top. The built-in cleaning sieve is automatically pushed
downwards and removes even small pieces of food residue from the
pin block.
The lid should remain open during this process. If the self-cleaning
process is launched when the cutter top is closed, there must not be
any blade inserts in the frame.
27
GB