Husqvarna K1 PACE Manuel D'utilisation page 11

remove your hearing protection as soon as the motor
stops.
• Use approved eye protection to decrease the risk
of injury from thrown objects. If you use a face
shield then you must also wear approved protective
goggles. Approved protective goggles must comply
with standard ANSI Z87.1 in the USA or EN 166 in
EU countries. Visors must comply with standard EN
1731.
• Use heavy duty gloves.
• Use approved respiratory protection. The use of
products such as cutters, grinders, drills, that sand
or form material can generate dust and vapours
which may contain hazardous chemicals. Check the
nature of the material you intend to process and use
appropriate breathing mask.
• Use tight-fitting, heavy-duty and comfortable clothing
that permits full freedom of movement. Cutting
generates sparks that can ignite clothing. Husqvarna
recommends that you wear flame-retardant cotton or
heavy denim. Do not wear clothing made of material
such as nylon, polyester or rayon. If ignited such
material can melt and cling to the skin. Do not wear
shorts.
• Use boots with steel toe-cap and non-slip sole.
• Always keep a first aid kit near.
• Sparks can come from the cutting blade. Always
have a fire extinguishing available.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If
the safety devices are defective, speak to your
Husqvarna approved service agent.
• Do not change the safety devices.
• Do not use the product if protective plates, protective
covers, safety switches or other protective devices
are defective or not attached.
Functions of the user interface
This operator's manual gives descriptions of the
functions of the control panel for the product. The control
1598 - 002 - 14.02.2022
Read the warning
panel operates important functions and setups of the
Troubleshooting of the product on
product. Refer to
page 29 to find solutions for the warnings.
6
5
4
3
1
1. On/Off button.
2. Accessories On/Off button (not used).
3. Battery status indicator.
®
4. Bluetooth . Refer to
on page 22 .
5. Temperature warning indicator, high or low. Refer to
Troubleshooting of the product on page 29 .
6. X-Halt warning. Refer to
product on page 29
7. Error/Warning indicator. Refer to
the product on page 29 .
To do a check of the control panel
1. Push and hold the On/Off button until the LED
To start the product on page
comes on. Refer to
25 .
2. Push and hold the On/Off button until the LED goes
off.
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you put your hand around
the handle and press the power trigger lockout (A), it
releases the power trigger (B). If you release the handle,
7
2
®
Bluetooth wireless technology
Troubleshooting of the
Troubleshooting of
11