Leg Assembly - Garlando Open Air Guide D'assemblage

Leg Assembly

Lay the football table on a flat and even surface. Indoors, protect your floors by placing a carton sheet under the
table. You can use the packing carton.
While keeping the table upside down, open the legs
Rod Assembly
The football-table is equipped with 4 rods for each team. Each bar is provided with an inner bar (telescopic
mechanism) already installed into the main bar and ending with a black plastic bearing retainer for inserting into the
cabinet on the side where the bar is not protruding. (side opposite to the handle side).
Goalkeeper (1 player-rod): at the end of the playfield. Position A
•
Defence(2 player-rod): in front of the same colour goalkeeper. Position B
•
Mid-fielder (5 player-rod): in the middle of the playing field, in front of the
•
5-player rod of the opposite colour. Position C
Forward (3 player-rod): in front of the 2 player-rod of the opposite colour.
•
For example: the blue
forward rod faces the red defence rod. Position D
•
Start by placing the 1 player-rod and then all the others of the same colour
following the abovementioned positions. Do the same for the other colour team.
Diagram of final rod assembly
Ivory
Player side
Tightly screw the 4 threaded bolts and bring the
table on its feet.
Ivory counter
Blue counter
Blau Blue
Bl Player side
19