Preparation Of The Skin; Removal Of Calluses - Emjoi Micro-Pedi AP-3RP Mode D'emploi

❐ Do not press the device onto your skin. This could be
injured.
❐ To prevent accidents, keep the device away from head hair,
eyelashes, eyebrows, textiles, cables and shoe laces etc.

Preparation of the Skin

1. Before using the device, wash your feet and dry them
well. Make sure that your feet have no cream or oil resi-
dues on them.
The drier the skin, the better it can be worked on
with the device.

Removal of Calluses

2. Remove the protective cover from the device.
3. To remove thick calluses (e.g. on your heels), you require
the coarse blue roller. To remove dry and thin callus ar-
eas, use the fi ne magenta-coloured roller. Make sure that
the correct roller is inserted in the device and is undam-
aged. If it is not, exchange the roller (see the "Changing
the Roller" section).
4. Switch on the device by simultane-
ously pressing the release button on
the switch and sliding the 01 switch
upwards (1 will now be visible beneath
the switch).
5. Place the rotating roller against the cal-
lus which is to be removed and move
the device back and forth and to the
sides on the callus. Move the device
slowly and without pressure.
29