Out Of Range - switel BCC 47 Mode D'emploi

6. LC display

7. Out of range

S
When the receiver is out of range, the flashing out of range alarm
icon appears in the receiver's display. In addition, the receiver
also issues a recurrent acoustic signal. This acoustic alarm
always occurs when connection to the transmitter is interrupted.
8. Alarm
Visual and acoustic alarms are issued by the receiver when:
S
the connection between the receiver and transmitter is
interrupted or the transmitter is switched off.
S
the transmitter is set to a different channel from the receiver.
S
the transmitter is set to a different pilot tone from the receiver.
S
the batteries in the transmitter or receiver are too weak.
9. Belt clip
S
The transmitter unit and receiver unit are equipped with a belt
clip. It also serves as a positioning aid.
44
Out of range" icon
Channel: CH1, CH2
Baby Sleeping" icon (energy
save mode)
Battery icon:
full
half full
empty
Baby Calling" icon:
constantly alternating
in display