switel BCC 47 Mode D'emploi page 41

S
If you do not intend to use the units for a longer period of
time, remove all the batteries. Otherwise, they could leak.
S
The transmitter and receiver display a battery icon.
The current charge status is indicated in the display.
S
It is recommended to use the 6 V adapter, 200 mA socket,
centre negative (−) for both units.
S
When both units are equipped with batteries and the power
adapter plug is connected, both units continue to operate
even in the event of a power failure.
7 Operation
1. Transmitter unit
S
Ensure that the power adapter plug is connected or the batteries
have been inserted properly.
S
Position the transmitter unit near the baby and ensure that the
microphone is pointing towards the baby to enable optimum
transmission. (Fig. III)
Ensure that the unit is out of reach of the baby. Never place
the unit in the baby's bed or playpen!
S
When the microphone integrated in the transmitter unit detects
noises (range 1 to 2 m), it automatically starts to transmit signals
to the receiver unit. When no further noise is detected,
transmission is stopped.
2. Receiver unit
S
Ensure that the batteries have been inserted.
S
Place the receiver unit near the supervising adults (Fig. III).
S
Move the loudspeaker control to the required setting.
S
When a signal is received from the transmitter unit, the
back−lighting of the receiver unit display lights up and the Baby
Calling" icon flashes.
41