Eaton PowerXL DG1 Notice D'installation page 3

PowerXL DG1 Option Cards
Wire Sizes
Wire Type Wire Size
Solid Cu –90°C 12–28 AWG (0.2~2.5 mm
Stranded Cu –90°C 12–30 AWG (0.2~2.5 mm
Control Wiring Requirements
Item Directive
Product IEC 61800-2
Safety UL 508C, IEC / EN 61800-5-1
EMC (at default Immunity: EN / IEC 61800-3, 2nd environment
settings)
Radiated emissions: EN / IEC 61800-3 (Transient Testing included), 1st
environment
Conducted emissions: EN / IEC 61800-3
Category C1: is possible with external filter connected to drive. Please
consult factory
Category C2: with internal filter maximum of 10m motor cable length
Category C3: with internal filter maximum of 50m motor cable length
I/O Card Input / Output
Board Allowed
Type Slots
DXG-EXT-3DI3DO1T A, B
DXG-EXT-1AI2AO A, B
DXG-EXT-3RO A, B
DXG-EXT-THER1 A, B
DXG-EXT-6DI A, B
DXG-EXT-3DI3DO1T: 3 x DI, 3 x DO, 1 x Thermistor, 24 Vdc / EXT Option Card
Terminal Torque
2
) 4.5 in-lb (0.5 Nm)
2
) 4.5 in-lb (0.5 Nm)
Digital Input Digital Output
ID (DI) (DO)
0x3012 3 3
0x3013 — —
0x3014 — 3
0x3015 — —
0x3016 6 —
Analog Input Analog Output PT100
(AI) (mA / V) (AO) (mA / V) Input
— — —
1 2 —
— — —
— — 3
— — —
Instruction Leaflet IL040022EN
Effective April 2015
EATON www.eaton.com 3