Manual Mode; Shutdown Mode; Changing The Batteries - Elesta RTU200B Mode D'emploi

Manual mode

( ) For a period that can
be set from 30 minutes to
72 hours
This mode is used to set a
set-point temperature for a given
period.
From the automatic mode (AUTO),
press the button.
The manual mode duration flashes.
Press + or - to set the period
required (e.g. 1.5 hours).
Press OK to confirm.
The temperature flashes.
Press + or - to set the temperature.
Press OK to confirm.
To cancel the manual mode, press
the C button or turn the knob.
Manual mode is
the current mode
- 34 -

Shutdown mode

To shut down the heating
(in summer, for example).
Turn the knob to .
The thermostat displays the room
temperature measured.

Changing the batteries

From the moment the battery level
symbol appears, you have around
3 months to change them
(2 LR03 or AAA-type 1.5 V
alkaline batteries).
The following precautions must
be respected:
- ensure that the +/- polarities are correct when the
batteries are fitted into the unit,
- do not dispose of used batteries in unauthorized
places (you should respect the environment by
taking the batteries to a suitable collection site),
- do not recharge them,
- you have approximately 45 seconds to change
the batteries before the time setting is reset to zero
(in this case, reset the time and date).
Measured temperature
Battery level
symbol
- 35 -