Elesta RTU200B Mode D'emploi page 14

CF03 - Choosing the operating mode
On / Off regulation
Choosing the
P.I. application radiator 15 min.
operating mode
P.I. application radiator 30 min.
P.I. application radiator 45 min.
P.I. application radiator 60 min.
P.I. Floor 30 min.
P.I. Floor 60 min.
P.I. : Proportionnal-integral
Press + or - to make your choice, OK to confirm it and
go to the next menu.
- 26 -
CF04 - Control hysteresis
You can only access this menu if
CF03 = 0
Adjustable from 0.2°C to 2°C by
increments of 0.1°C
The shift is symmetrical.
Example: Setting = 0.4°C.
Shift = -0.2°C/+0.2°C.
Press + or - to make your choice, OK to confirm it and
go to the next menu.
CF05 - ECO operation in
COOL mode
ECO operation in
COOL mode
Press + or - to make your choice, OK to confirm it and
go to the next menu.
Turn the knob to exit the "Starting up" mode.
Shutdown
Control by the thermostat
- 27 -