Code Description - Asus MAXIMUS VI GENE Mode D'emploi

Code Description
D2 PCH initialization error
D3
Some of the Architectural Protocols are not available
D4 PCI resource allocation error. Out of Resources
D5
No Space for Legacy Option ROM
D6 No Console Output Devices are found
D7
No Console Input Devices are found
D8
Invalid password
D9
Error loading Boot Option (LoadImage returned error)
DA
Boot Option is failed (StartImage returned error)
DB
Flash update is failed
DC
Reset protocol is not available
Points de référence ACPI/ASL
Code Description
0x01
System is entering S1 sleep state
0x02
System is entering S2 sleep state
0x03 System is entering S3 sleep state
0x04
System is entering S4 sleep state
0x05 System is entering S5 sleep state
0x10
System is waking up from the S1 sleep state
0x20 System is waking up from the S2 sleep state
0x30
System is waking up from the S3 sleep state
0x40 System is waking up from the S4 sleep state
0xAC
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
1-38 Chapitre 1 : Introduction au produit