5.2 Installation and connection
•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and which is table.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.3 Assembly and operation
Parts description
① ① ① ①
⑩ ⑩ ⑩ ⑩
- 22 -
② ② ② ②
③ ③ ③ ③
④ ④ ④ ④
⑤ ⑤ ⑤ ⑤
⑥ ⑥ ⑥ ⑥
⑦ ⑦ ⑦ ⑦
⑧ ⑧ ⑧ ⑧
⑨ ⑨ ⑨ ⑨
1.
Pusher
2.
Cover with feed chute
3.
Cutting disc
4.
Fixing disc
5.
Outlet attachment
6.
Relay drive attachment
7.
Safety locks 2x
8.
Engine block /casing
9.
Speed regulator switch
10. Engine drive