GE 535 Série Manuel D'utilisation page 14

Loading
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and
silverware baskets may vary from your model.
3rd Rack (on some models)
The 3rd rack is the recommended location for large
utensils.
Take care when loading, unloading,
CAUTION
or transporting the utensil tray.
The tray may contain sharp or heavy items. If items
are dropped from the tray or the tray is dropped,
injury could occur.
The 3rd rack is also removable to allow extra large items to be placed in the upper rack:
To remove the 3rd rack:
14
IMPORTANT NOTES:
Do not allow cutlery of different materials to touch each
other in the 3rd rack. Doing so may cause discoloration
of the cutlery.
The tray is only meant to be used with a GE Appliances
3rd rack dishwasher to hold large utensils, cooking
utensils, and other small items. Using the tray for any
other purpose could result in damage to the tray or
damage to anything interacting with the tray.
Ensure that the 3rd rack is fully closed before shutting
the dishwasher door. Shutting the door with the
rack partially extended could cause damage to the
dishwasher.
1
With the rack fully extended, lift the front of the rack so that
the rack roller wheels clear the end hook.
2
Continue to pull the rack until the remaining rack roller
wheels clear the end hook.
3
Replace the rack by aligning the rack roller wheels on the
end hook and rack rails – Ensure all roller wheels are
located on top of the rack rails.
49-4000218 Rev 1