Packaging Content; Main Parts - ATI BB 12 Mode D'emploi

BB.4508 45
BB.4511 45
BB.4512 45
BB.4512R 45
BB.4508X 44
BB.4511X 44
BB.4512X 44
BB.6000SR 60
BB.6005SS 60
BB.6008SS 60
BB.6012SS 60
BB.6005 60
BB.6008 60
BB.6011 60
BB.6012 60
BB.6012R 60
BB.6008X 59
BB.6011X 59
BB.6012X 59
BB.10005 100
BB.10011 100
BB.10012 100
MODEL DRY
WEIGHT [kg]
BB.12....SS 10
BB.12....
12
BB.12....SR
BB.12....X 8
BB.19....SS 9
BB.1900SR
13
BB.19....
BB.22....SS 10
BB.2200SR
14
BB.22....
BB.22....X 10
BB.30....SS 12
BB.3000SR
16
BB.30....
BB.30....X 12
BB.45....SS 16
BB.4500SR
20
BB.45....
BB.45....R 24
BB.45....X 15
BB.60....SS 20
BB.6000SR
24
BB.60....
BB.60....R 28
BB.60....X 18
BB.100.... 35
3

PACKAGING CONTENT

The water heater is packaged and delivered in a cardboard
box with appropriate protection. Apart from the unit, inside
the box there are 2 stainless steel mounting brackets with
800W-220V~
copper - 16 turns
1200W-110V~ copper - 16 turns
1200W-220V~ copper - 16 turns
1200W-220V~ copper-2x16 turns
800W-220V~ stainless steel -
18 turns
1200W-110V~ stainless steel -
18 turns
1200W-220V~ stainless steel -
18 turns
No copper - 16 turns
500W-220V~ No
800W-220V~ No
1200W-220V~ No
500W-220V~ copper - 16 turns
800W-220V~ copper - 16 turns
1200W-110V~ copper - 16 turns
1200W-220V~ copper - 16 turns
1200W-220V~
copper-2x16 turns
800W-220V~ stainless steel -
18 turns
1200W-110V~ stainless steel -
18 turns
1200W-220V~ stainless steel -
18 turns
500W-220V~ copper - 16 turns
1200W-110V~ copper - 16 turns
1200W-220V~
copper - 16 turns
DIMENSIONS
LxPxH [mm]
375 x 250 x 320
395 x 250 x 320
385 x 250 x 320
420 x 190 x 495
420 x 190 x 495
320 x 475 x 320
320 x 475 x 320
320 x 475 x 320
320 x 620 x 320
320 x 620 x 320
320 x 620 x 320
320 x 880 x 320
320 x 880 x 320
320 x 915 x 320
320 x 880 x 320
320 x 1060 x 320
320 x 1060 x 320
320 x 1095 x 320
320 x 1060 x 320
460 x 460 x 900
ENGLISH
related counter-brackets, a bag containing the fixing screws
and this booklet with the warranty certificate.
4 CONSTRUCTION AND OPERATION
DESCRIPTION
For models BB.......: The purpose of this appliance is to
heat domestic hot water in two different ways:
1 By the heat exchange between the engine cooling water
and the water stored inside the tank. This heat exchange
is possible thanks to a heat exchanger. The engine
cooling water circulates through a coil placed at the
centre of the tank in order to spread heat uniformly.
2 By means of an electrical heater element (standard
supplied with the appliance).
For models BB....SR: The purpose of this appliance is to
heat domestic hot water through the heat exchange
between the water coming from the boat engine cooling
system and the water stored inside the tank. This exchange
occurs by means of a heat exchanger.
For models BB.....SS: The purpose of this appliance is to
heat domestic hot water through the heat exchange
between the electrical heater element and the water inside
the tank.

MAIN PARTS:

Storage tank: it is made of a thick sheet metal highly
resistant to pressure.
For models BB......: The inner surface of the tank is
coated with opal glass (a vitreous coating backed at
more than 850° C). This special coating allows a high
chemical resistance (to organical solvents and many
other chemical substances), an excellent abrasion
resistance (low friction) and a very good thermal stability
(opal glass on steel resists up to 500° C and frost and
cold have no effect on it). Generally speaking, all this
makes the tank life longer and the domestic water
healthier.
For models BB...X: The tank is entirely made of AISI
316L stainless steel.
Casing: the casing is very resistant to bumps and to any
external stress, having at the same time a very nice
design. It is made of painted aluminium (in models
BB....) or stainless steel (in models BB...X). An external
film protects the casing from scratches or other
damages during installation.
Thermal insulation: A 2 cm thick insulation in expanded
polyurethane with closed cells avoids useless heat
losses. In this way heat loss for thermal inertia is
reduced to 1°C per hour over a period of 24 hours.
Heat exchanger: It is made of copper or AISI 316L
stainless steel (according to the model) and has a large
exchange surface allowing to exploit at best the heat of
the engine cooling water and to get hot water even in
extreme conditions (very small temperature differences).
According to some tests done in our laboratory on a
Boat Boiler 19 litres, this appliance can heat about 90
litres of domestic hot water at 40° C every 30 minutes,
2 - ENGLISH
edizione APRILE 2008
fig. 4-1 : copper heat
exchanger
(models BB....)