Battery Change; Correct Disposal Of This Product - QUNDiS RNG5 Notice D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
EN - Operating and Installation Instructions Q gateway 5

Battery change

Organization
Access the device location:
ATTENTION!
Battery replacement may only be carried out by trained and skilled personnel. Only a battery approved for the
Q gateway 5 may be used, otherwise there is a risk of explosion!
ATTENTION!
After opening the battery compartment, the battery
-
ATTENTION!
PCB may be damaged
-
1. Battery change (standard)
• Open the battery compartment
• Remove the old battery.
• Close the battery compartment.
Battery change for devices with external antenna
• Disconnect the battery connector
• Remove the entire battery compartment
-
battery compartment.
• Open the battery compartment and remove the old battery.
• Close the battery compartment.
2. Testing the connection to the Q SMP
1
long press
The display
3. Completing the battery change
• Close housing

Correct disposal of this product

Products delivered in Germany and directly from Germany
All appliances must be brought to a controlled recycling plant. Due to governing regulations, electrical and electronic appliances
waste disposal contractors
at their own expense.
In countries of the European Community excepting Germany
channels.
34
Tools / Material:
1 slotted screwdriver
1 battery replacement set
7
.
6
7
4
SYNC
FUM5-00AM-DES-G5021
On-site preparation:
-
- Open housing
7
V2.1 / 14.03.2019

Publicité

Table des Matières
loading

Table des Matières