LEDs and Error Signaling on Device
Note: Green and red LEDs fl ash momentarily at device startup.
Green: Supply voltage provided
Yellow:For resistance measurement, the identifi ed connection type is
signaled once at the start
(2/3/4-time blinking corresponds to 2/3/4-wire measurement)
Red:
Error status; LED blinking indicates error number
No. Error
Value below range limit
Value above range limit
Sensor short circuit
Sensor open
Pot/Strain gauge: resistance error**
Not used
Identifi cation of connection
Switch misadjusted
Adjustment error
Device error *
* Self-locking error
46
Output [mA]
3.6
< 3.6
Output [V]
5.25
10.5
5.25
10.5
5.25
10.5
5.25
10.5
5.25
10.5
5.25
10.5
5.25
10.5