Bosch GLM400C Consignes D'utilisation Et De Sécurité page 19

Bluetooth
Operating frequency band
Max. transmission power
A) For measurements from the front edge of the measuring tool, applies to high
reflectivity of the target (e.g. a white-painted wall), weak backlighting and 25°C
operating temperature. In addition, a deviation of ±0,05mm/m must be taken
into account.
B) For measurements from the front edge of the measuring tool, applies to high
reflectivity of the target (e.g. a white-painted wall), and strong backlighting. In
addition, a deviation of ±0.15 mm/m must be taken into account.
C) After calibration at 0° and 90° with an additional pitch error of max. ±0.01°/
degrees up to 45°. The measurement accuracy is related to the 3 orientations
based on the calibration of the inclination (tilt measurement), see picture H.
D) At 25°C operating temperature.
E) In the continuous measurement function, the maximum operating temperature
is +40°C.
F) When using Bluetooth
connection depending on the model and operating system. Bluetooth
must support the GATT profile.
G) Automatic switch-off of the measuring tool is adjustable after 2, 5, 10 minutes
or never.
H) The left-hand side of the measuring tool serves as the reference level for grade
measurement.
A long battery runtime is achieved by means of energy-saving measures, such
as deactivating the Bluetooth
brightness, etc.
The measuring tool can be clearly identified with the serial number 15 on the type
plate.
2610049010 04-18 GLM400C.indd 19
®
®
Low Energy tools, it may not be possible to establish a
®
function when not required, or reducing the display
Bluetooth
®
(4.1 low-energy)
2402 – 2480 MHz
F)
8 mW
®
devices
19
4/6/18 8:20 AM