Sagem FAX ATA 101S Guide D'installation page 14

101S-easy-install-west-europe-253021959-A.indb 14 01S-easy-install-west-europe-253021959-A.indb 14
Calling the Web Interface
1 Insert the network cable into the network connection
socket (RJ-45) of the device marked with LAN.
2 Connect the other end on the network cable of your
computer (RJ-45).
3 Open the window with the properties of the network
card of your computer. For Windows PC: Click on
Start > Settings > Network Connections. Right click
on the LAN connection. You will fi nd the properties of
the network connection in the pop-up menu.
4 Select the connection
click on Properties.
5 Activate Use following IP-Address and enter the IP
address. For the factory settings of the device, enter
the following details:
IP adress: 192.168.134.10 (IP address of the compu-
ter)
Subnet mask: 255.255.255.0
Default gateway: 192.168.134.1 (IP Address of the
LAN socket of the device)
6 Confi rm with
14
Internet Protocol (TCP/IP) and
OK.
FAX_ATA_101S
7
8
9
1
1
P
1
1
In
26.09.2007 15:0 26.09.2007 15:0