Télécharger Imprimer la page

Agilent Technologies TwisTorr 704FS Mode D'emploi page 313

Publicité

Take care to have a good contact between the metallic case and the external
NOTE
shield of the wire. Moreover, this operation has to be done at least on the
controller side.
In this way, you will be sure to reduce the influence of the external
noise and to accomplish the EMC requests. In picture d is showed the
cable assembled.
Figure 42
TwisTorr 704 FS User Manual / 87-901-051-01 (A)
Technical Information
Serial Cable Installation
17
313/334

Publicité

loading