Electrical Connection; Getting To Know Your Appliance - Bosch KIN Série Mode D'emploi

Electrical connection

The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the protec-
tion class I. Connect the appliance to
220–240 V/50 Hz alternating current via
a correctly installed socket with protec-
tive conductor. The socket must be fused
with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply match
the values of the mains supply. This
information can be found on the rating
plate. Fig. .
ã=
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-con-
trolled inverters are used for photovoltaic
systems which are connected directly
to the national grid. Sine-controlled
inverters must be used for isolated appli-
cations (e.g. on ships or in mountain
lodges) which are not connected directly
to the national grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. 1
* Not all models.
1-9 Controls
10 Light
11 Glass shelf in the refrigerator
compartment
12 Extendable glass shelf
13 Vegetable container
14* Berry tray
15 Freezer calendar
16 Frozen food container
17 Butter and cheese compartment
18 Door shelf
19* Vario door shelf
20 Shelf for large bottles
A Refrigerator compartment
B Freezer compartment
en
27