Technical Data - Jackson Airmax Instructions D'utilisation

TECHNICAL DATA

Model
Viewing area
Weight
Open state shade
Closed state shade
Shade adjustment
Sensitivity adjustment
Delay adjustment
Grinding mode
Switching time at 23°C
Clearing time
UV/IR protection
Temperature range
TIG detection
Energy supply
MARKINGS
The PPE is subject to the conformity assessment procedure according to
Regulation (EU) 2016/425.
Notified bodies:
Module B:
Notified body 1883, ECS (European Certification Service) GmbH, Hüttfeldstraße
50, D-73430 Aalen, Germany.
Notified body 0082, APAVE SUDEUROPE SAS, 8 rue Jean-Jacques Vernazza
ZAC. Saumaty-Séon – BP 193, 13322 Marseille Cedex 16, France.
Module D:
Notified body 0194, INSPEC International Ltd, 56 Leslie Hough Way, Salford, Gt
Manchester, M6 6AJ, UK.
Duo welding helmet is tested according to the EN 175, EN 166 and EN 379
standards.
Duo AIR welding helmet is tested according to the EN 12941 standard. The cer-
tificates are only valid in combination with Airmax
The welding helmet shell used with headgear has TH3 classifications according
the breathing protection standard.
8
Duo
ADF
92 x 41 mm
115 g
4
9-13
yes / external
yes / internal
yes / internal
yes
0.3 ms
0.1 - 0.8 s
UV15 / IR16
-5°C / +55°C
> 20 Amp
solar cells / 3V Li-ion batteries
power unit set.
®