Jackson Airmax Instructions D'utilisation page 4

P R SL-Filter AIRMAX:
Filter colour coding:
EU Manufacturer
Module B Audit conducted by
Module D Audit conducted by
WARNINGS AND LIMITATIONS OF USE
• This PAPR is not suitable for work in poorly ventilated areas (i.e. confined spaces) where oxygen level is suspected to be below 17%.
• Determination of the use of this PAPR system should be addressed by a trained health and safety officer that determines the
suitability of the protection offered by this device for the particular task and the hazards involved.
• Do not use this respiratory device when the concentration of hazardous substances has not been determined and their impact on
human health and safety by a trained health and safety officer.
• The wearer of this respiratory system must have read this manual and fully understood the functions and settings on the AIRMAX
PAPR system. Its use, cleaning, maintenance, disinfection and storage conditions should follow the instructions provided in this
manual. Products returned for warranty replacement will only be considered for replacement only if all recommendations provided
in this manual were fully followed.
• Do not use the AIRMAX
not use the AIRMAX
®
• Use only original filters certified for EN 12941:1998+A1:2003+A2:2008 TH3 P R SL the particular respiratory system.
• If the blower unit acoustic alarm sounds please leave immediately the working area and enter a non-contaminated environment.
• Do not store nor use this respiratory system under temperature conditions that exceed recommendations of this manual (below
0°C and above +40°C).
• Do not use for overhead welding where there is a falling molten metal hazard. This welding helmet/filter system does not provide
protection from molten metal and spatter during direct overhead welding.
• Particle filters are not suitable to provide protection against gases and vapours above occupational exposure limits. Please use TH3
P R SL filters packed in original packaging only, unsealed or second-hand products must not be used.
• Carefully review the sealing gasket and search for any visible damage. Do not use if its serviceability is suspected to be affected.
Only use particle filters produced by Surewerx USA Inc properly labelled and packed.
• Do not attempt to touch or modify the components of this PAPR.
• At very high work rates the pressure in the device may become negative at peak inhalation flow. JACKSON SAFETY
PAPR systems are for use only by competent, trained personnel.
• Make sure that the air hose doesn`t make a loop and does not get cought up on something in the work environment.
• Filters shall not be fitted directly to the helmet / hood.
• Do not allow water or other liquids to enter the blower unit.
• When the blower unit is switched off little or no respiratory protection is to be expected. When the blower unit is switched off a rapid
build up of carbon dioxide and depletion of oxygen within the head unit may occur.
• Evacuate the contaminated area in any of the alarms is detected, any part of the product becomes damaged or a considerable
change in the air flow or smell is detected. You should also leave the area if you feel dizziness, discomfort or difficulty in breathing.
EN REGULATORY COMPLIANCE AND CE MARKS
Compliance
CE marks
PAPR system in areas were explosions might occur. Avoid direct exposure to flames and/or sparks. Do
®
PAPR system in the presence of strong winds.
Product code J7210
White (background)
Surewerx USA Inc
EN 12941:1998+A1:2003+A2:2008 TH3 P R SL
APAVE SUDEUROPE SAS
Notified Body 0082
13322 MARSEILLE
INSPEC International Ltd.
Notified body 0194
56 Leslie Hough Way,
Greater Manchester M6 6AJ
United Kingdom
See labels on product components
4
Elgin IL
USA
60123
CS60193
CEDEX 16
France
Salford,
®
AIRMAX
® ®