Pioneer AVIC-Z150BH Manuel D'installation page 11

Connecting the system
The navigation unit
Power cord
Fuse (10 A)
RCA connector
Yellow/black
If you use equipment with a mute
function, connect that equipment to
the Audio Mute lead. If not, keep the
Audio Mute lead free of any
connections.
Note
Audio source will be set to mute or attenuate, while
the following sounds will not be muted or
attenuated. For details, refer to Operation Manual.
— Voice guidance of the navigation
— Incoming ring tone and incoming voice of the
cellular phone that is connected to this navigation
system via Bluetooth wireless technology
Blue/white
To auto-antenna relay control terminal or
antenna booster power control terminal
(max. 300 mA 12 V DC).
If the vehicle has a glass antenna,
connect to the antenna booster power
control terminal (max. 300 mA 12 V DC).
15 cm (5-7/8 in.)
Section
02
11
En