Troubleshooting/Repair - Nikon COOLSHOT 20i Manuel D'utilisation

„ Troubleshooting/Repair
„
En
If this product fails to function as expected, check the list below before consulting your local dealer or the
Fr
store where you purchased it.
l If there is a problem with the product.
Problem
• Does not turn on
• Unable to measure
• Anomalous result
l If you require a repair, please contact your local dealer or the store where you purchased the product.
Do not repair or disassemble. It may result in a serious incident.
Please note that Nikon is not responsible for any direct or indirect damage if the user attempts to repair or
disassemble the product.
18
• Press the PWR button (top of the body).
• Check that the battery is inserted correctly.
• Replace the battery with a new one.
• Confirm the settings.
• Confirm if it can measure a large target close to you (example: a building
approx. 15 m/yd. ahead of you).
• Clean the lens surface if necessary.
Cause/Solution