Available Operations During A Call; Useful Functions; Songpal With Android Phone - Sony XAV-W651BT Mode D'emploi


(voice command)*
Say a voice tag stored on the cellular phone.

(phone number input)
Enter the phone number.
 Preset numbers (1 to 6)
Select the stored contact.
To store the contact, see "Presetting phone
numbers" (page 16).
*1 The cellular phone needs to support PBAP (Phone
Book Access Profile).
*2 Do not use the voice command function on the
cellular phone while it is connected to this unit.
*3 Voice command may not work depending on the
recognition specification of the cellular phone. For
details, visit the support site on the back cover.
3
Touch .
The phone call starts.
Presetting phone numbers
You can store up to 6 contacts in the preset list.
1
In the phone screen, select a phone number
that you want to store in the preset dial
from the phonebook.
The confirmation display appears.
2
Touch [Preset], then the desired preset
number (1 to 6).
The contact is stored to the selected preset
number.
Available Operations During a
Call
To adjust the ringtone volume
Rotate the volume control dial while receiving a call.
To adjust the talker's voice volume
Rotate the volume control dial during a call.
To adjust the volume for the other party (Mic
gain adjustment)
During a handsfree call, touch
Gain] to [Low], [Middle], or [High].
To switch between handsfree mode and
handheld mode
During a call, touch
phone call audio between the unit and cellular
phone.
Note
Depending on the cellular phone, this operation may not be
available.
To answer an incoming call automatically
Touch , then set [Auto Answer] to [ON].
16
GB
2 * 3
, then set [MIC
to switch the

Useful Functions

SongPal with Android Phone

Downloading the latest
"SongPal" application is required
from Google Play.
Notes
• For your safety, follow your local
traffic laws and regulations, and do
not operate the application while
driving.
• Connecting an Android phone while
"SongPal" is installed to this unit
allows you to receive notifications of
your SMS or calendar, etc. through
the car speakers and control the unit by voice command.
• What you can control with "SongPal" varies depending on
the connected device.
• To make use of "SongPal" features, see the details on your
Android phone.
• Display images of the "SongPal" application used in this
Operating Instruction may differ with the actual ones.
• Messages of the "SongPal" application that appear on this
unit and your Android phone may differ.
• For further details on "SongPal," visit the following URL:
http://rd1.sony.net/help/speaker/songpal/
Establishing the SongPal connection
1
Make the BLUETOOTH connection with
Android phone (page 9).
2
Launch the "SongPal" application.
3
Press HOME, then touch [Settings].
4
Touch , then set [SongPal] to [Connect].
Connection to Android phone starts.
For details on the operations on an Android
phone, see the help section of the application.
If the device number appears
Make sure that the number is displayed (e.g.,
123456), then select "Yes" on the Android phone.
To terminate connection
Set [SongPal] to [Disconnect] in [General Settings].