Sony DXC-9100P Mode D'emploi page 26

Adjusting and Setting with Menus
TRIGGER CYCLE
Sets the cycle for the the built-in memory to be controlled
by the internal pulse.
Selection Function
OFF The built-in memory is controlled by an external
pulse.
2-FRM to 10 min Sets the cycle of the internal pulse within
the range from 2-FRM to 10 min.
MENU SW
Selects whether to switch the user preset A and B by using
the FUNCTION UP button on the rear panel without the
menu displayed.
Selection Function
OFF Disables the FUNCTION UP button to switch between
the user presets.
ON Enables the FUNCTION UP button to switch between
user presets.
When you press the FUNCTION UP button, the user
preset is switched instantaneously.
For example, if user preset A is selected when the "MENU
SW" is set to ON, pressing the FUNCTION UP button
switches to user preset B after returning to the regular
screen.
26
Note
When you switch between user presets with the FUNCTION
UP button, the currently selected user preset name is not
displayed on the monitor.