Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
After installation
After installing this product
1
Reconnect the negative (–) terminal of
the vehicle's battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (–) cable to the negative (–) term-
inal of the battery.
2
Start the engine.
3
Change the settings as desired.
= For details concerning operations, refer to
Operation Manual.
4
Drive down an unobstructed road until
the GPS starts receiving the signal nor-
mally.
Note
After installing this product, be sure to check at a
safe place that the vehicle is performing normal-
ly.
Section
04
29
En
Publicité
Chapitres
Table des Matières
