Dmx Linking - Chauvet Professional Well Fit Guide De Référence Rapide

Masquer les pouces Voir aussi pour Well Fit:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WELL Fit QRG
What Is
Included
AC Power
AC Plug
Battery Charge
Notes
Replacing The
Fuse

DMX Linking

DMX Connection
Infrared Remote
Control (IRC)
·
6–WELL Fit
·
Neutrik powerCON power cord
·
IR remote
The charging case has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the charging case from power via breaker or
by unplugging it.
·
Recharge the battery within three days from last use.
·
Recharge the battery to full capacity before storing this product.
·
For best results, charge the battery in a temperature between 32 °F (0 °C)
and 95 °F (35 °C).
·
When charging the battery, keep the product at no less than 1 m from any
open flame or hot plate.
·
When charging the battery, keep the road case's cover open.
·
Always charge the battery with the product in an upright position.
·
Do not charge the battery for more than 24 hours.
·
Perform a full discharge/recharge cycle every three months.
CAUTION: The power switch must be in the off position before placing the
product in the charging case.
The WELL Fit has no external fuse. However, the road case charger comes with a
replaceable fuse.
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
The WELL Fit will work with a DMX controller using a wireless DMX
connection. A DMX Primer is available from www.chauvetprofessional.com.
The WELL Fit uses a wireless DMX data connection for its DMX personalities:
4 Ch, 6 Ch, 10Ch, HSI and HSV. See the User Manual for information about
connecting and configuring the product for DMX operation.
The WELL Fit is fully compatible with the Infrared Remote Control (IRC) from
CHAUVET. For more information on the IRC, download the User Manual from
www.chauvetlighting.com.
It may be necessary to turn the product off and on again when switching from
W-DMX to IRC and vise-versa.
·
·
·
Wire (U.S.)
Wire (Europe)
Black
White
Green/Yellow
Green/Yellow
3
Charging case
Warranty Card
Quick Reference Guide
Screw Color
Brown
Yellow/Brass
Blue
Silver
Green
EN

Publicité

Table des Matières
loading

Table des Matières