Table des Matières
Publicité
➢ ➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢ ➢ To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
➢ ➢ Replace full bag if necessary.
➢ ➢ Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Motor Protector
Protecteur du moteur
Protector de motor
Thermal Protector
Motor Protector
➢ ➢ The motor protector is located
➢ ➢ Automatically opens to provide
➢ ➢ Motor protector may open when
➢ ➢ Check operation by placing hand
➢ ➢ If the motor protector opens, the
➢ ➢ Do not block motor protector.
- 18 -
behind the wand holder on the back
of the vacuum cleaner.
cooling air to the motor when a clog
occurs or when dust bag is full.
using tools.
over end of hose.
vacuum cleaner will make a different
sound.
Publicité
Table des Matières
