Table des Matières
Publicité
➢ ➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum.
➢ ➢ During this time the headlight remains on.
➢ ➢ To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace
filters.
➢ ➢ Empty dust bin if necessary.
➢ ➢ Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal
protector has reset. Thermal protector will not reset if vacuum is not turned off even
if vacuum cools down.
Thermal Protector
Motor Protector
Motor Protector
Protecteur du moteur
Protector de motor
➢ ➢
Motor protector by-pass automatically
opens to provide cooling air to motor
when a clog prevents the normal air flow.
The motor protector by-pass valve may
also open when the dust bin is full.
➢ ➢ Motor protector may open when
using tools.
➢ ➢ If motor protector opens, the vacuum
will make a slightly different sound.
Note: Do not block motor protector.
- 18 -
Publicité
Table des Matières
