Publicité
Les langues disponibles
Les langues disponibles
Information on Structural Calculations
Slots in supporting walls are subject to the Standard DIN 1053 part 1, or
country- specific regulations.
These regulations are to be observed under all circumstances.
Before starting work, consult the responsible structural engineer, architect or
the construction supervisor. The permitted slot depth and width depends on
the slot length, wall thickness and the building material used.
Dust Extraction
Dust which occurs during your work is hazardous to health. That is
why the EMF 125 must be used with a vacuum cleaner, and a dust
mask has to be worn.
The suitable Wet/Dry Vacuum Cleaner DSS 35 M iP is available as
accessory. It can directly be attached to the connection on the dust hood.
Fig.6
Fig.7
Fig.8
When insert the suction hose pull the ring of the hose fixing and turn the
nozzle till the fixation engages.
The suction hose can be locked against
slipping out by means of the hose fixing.
Make the necessary drill hole as follows:
Put the suction hose in the connector of the
hood.
Mark the plug-in depth with a crayon.
(see arrow)
Drill 13 mm from this marking (line) a hole with
diameter 6 mm in the nozzle.
24
Publicité
