Sony STR-DA3300ES Mode D'emploi page 103

Setting audio/video output
signals to the zone 2
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 38).
2
Press MENU repeatedly to
display the GUI menu on the TV
screen.
3
Press v to select "Settings,"
then press
4
Press V/v repeatedly to select
"Multi Zone," then press
5
Press V/v to select the zone to
which you want to output
1
3-7
2
or b.
.
audio/video signals, then press
.
"Main" (this receiver) is always selected.
If you do not change the setting, proceed
to step 7.
6
Press V/v to select, "ON" or
"OFF," then press
7
Press V/v/B/b repeatedly to
select item and parameter, then
press .
Multi Zone menu parameters
x Power
Lets you turn zone operation on.
• ON
• OFF
x Input
Lets you select the source that is output to the
zone. Audio and video signals are output to
zone 2.
x Volume
Lets you adjust the volume in the zone.
.
continued
103 GB