2: Connecting The Tv - Sony BRAVIA KDL-50W800B Mode D'emploi

2: Connecting the TV

~
• Use an antenna cable connector no greater
than 14 mm thick.
• When connecting the cable to the Cable/
Antenna, input finger tighten only, over
tightening the connection can damage the
TV.
• Before moving the TV, disconnect all of the
cables connected to the TV to prevent
damaging the TV when it is moved.
• Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
• For more information on connections, refer to
the i-Manual.
x Shown with a Set Top Box with
HDMI connection
Set Top Box
12
US
Recommendation for an F type plug
Projection of the inner wire from the
connection part must be less than 1.5 mm.
7 mm max.
1.5 mm max.
(Reference drawing for an F type plug)
x Shown with a Set Top Box with
COMPONENT connection
Set Top Box