Kenwood KDC-BT420U Mode D'emploi page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
Symptom
Remedy
• Switch off the developer options on the Android device.
"NO DEVICE" or
• Reconnect the Android device.
"READING" keeps
• If this does not solve the problem, the connected
flashing.
Android device does not support [BROWSE MODE].
(  19)
Playback is intermittent
Turn off the power saving mode on the Android device.
or sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
"ADD ERROR" /
New station creation is unsuccessful.
"SEARCH ERROR"
"CHECK DEVICE"
Check the Pandora application on your device.
"NO SKIPS"
The skip limit has been reached.
"NO STATIONS"
No stations are found.
"STATION LIMIT"
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your device.
"CONNECT ERROR"
Communication is unstable.
"RATING ERROR"
Registration of thumbs up/thumbs down has failed.
"LICENSE ERROR"
You try to access from a country which Pandora is not
deliverable.
iHeartRadio station
If "Explicit Content" in [Account Settings] is checked in
cannot be selected.
the web version of iHeartRADIO, custom stations become
unavailable.
"CANNOT CREATE"
Custom station name creation is unsuccessful.
"CANNOT SAVE"
Addition to the favorite category failed.
"DISCONNECTED"
Check the connection to the device.
"NO SKIPS"
The skip limit has been reached. Retry later.
Symptom
Remedy
"NO STATIONS"
No stations are found.
"NOT CONNECTED"
Link to the application is impossible.
"IHEARTLINK UP"
Make sure you have installed the latest version of the
iHeart Link for KENWOOD application on your device.
"PLEASE LOGIN"
You haven't log in. Log in again.
"STATION NOT
Broadcast from the station is over.
AVAILABLE"
"STATION NOT SELECTED"
No station is selected.
"STREAM ERROR"
Broadcast data is interrupted.
"THUMB FAILED"
Registration of Thumbs Up/Down has failed.
"TIMED OUT"
The request has resulted in time-out.
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. (  3)
detected.
• Make sure you have entered the same PIN code to both
Bluetooth pairing cannot
be made.
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (  11)
• Adjust the microphone unit's position. (  11)
Echo or noise is heard
• Check the [ECHO CANCEL] setting. (  12)
during a phone
conversation.
• Reduce the distance between the unit and the Bluetooth
Phone sound quality
is poor.
device.
• Move the car to a place where you can get a better
signal reception.
21
ENGLISH

Publicité

Table des Matières
loading

Table des Matières