AVG VPC46DS2 Manuel D'utilisation page 20

1. IMPORTANT SAFETY INSTRUCTIONS (continued)
WARNINGS AND SAFETY INSTRUCTIONS (continued)

Make sure the unit is unplugged before cleaning or repairing.

Do not store or use gasoline or any other flammable vapors in the vicinity or any other appliance.
The fumes can help cause a fire or explosion.

Do not store explosive materials or sprays containing flammable material such as butane,
propane, pentane, etc. in the unit. Electrical components can ignite gas in the event of a leak. Do
not use any electrical devices inside the device.

It is important that the appliance be leveled to work properly. Be sure that it is placed in a vertical
position on an even, level surface.

We recommend that two (2) persons move and install the appliance in order to avoid accidents
and injury.

Be sure that the front of the appliance is unobstructed for air circulation and proper access to the
door.

Do not install the unit where it will be subject to direct sunlight, heat or humidity.

If you do not plan on using the appliance for an extended period of time, unplug it and leave the
door open.

When disposing of the appliance, please use a specialized waste collection service.

This device is not intended for use by a person (including a child) with reduced physical, sensory,
or mental capabilities, or one who does not have sufficient experience and knowledge on the use
of the appliance, unless the person has received instructions on how to use the device from a
person responsible for their well-being and if they were supervised the first time they use the
appliance. Children who use the appliance must be supervised to prevent them from playing with
the appliance.

Do not flatten or crush the electrical wire between the unit and the cabinet.

Do not turn the unit upside down, sideways or at an off-level angle.

Do not move the appliance without emptying the contents and only after securing the door in the
closed position.

Components must be replaced with original parts and servicing must be performed by an
authorized technician to minimize the risk of fire or possible explosion due to improper
maintenance

This unit should only be used as specified. The manufacturer will not be held responsible for any
damage due to improper use or repairs made by unqualified personnel.
20