Adjusting Of The Footrests - Vermeiren V300 XL Mode D'emploi

3.6

Adjusting of the footrests

3.6.1 Length of the footrests
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
   
ground. Keep a minimum distance from 60 mm (2.36 in.) above the ground.
3.6.2 Adjusting the footplates
The footplates can be used in 2 positions. Standard they are adjusted with the base plate in
the back position.
The footplates can be adjusted to the front by switching the left and right footplate.
3.6.3 Adjusting angle foot plate
Adjust the angle of the foot plate as follow:
1. Loosen bolt .
c
2. Adjust tube d in the desired angle. The angle indication (80° -85 ° -90° -95° -100° ) is
according the dashes e.
3. Retighten the bolt
Adjust the length of the footrests as follow:
1. Remove the screw
footrests).
2. Adjust the length of the footrest to a comfortable
length.
3. Tighten the screw
.
c
ƒ‰‡
V300 XL
2012-02
(on the back of the
c
properly.
c
The max
adjustable
length of the
footrest shall
be marked with
a triangle on
the tube.