Important; Cleaning Of The Flue; Cleaning Of The Glass; Cleaning Of The Ash-Drawer - Nordica ROSSELLA R1 BII Instructions Pour L'installation, L'utilisation Et L'entretien

ROSSELLA R1 BII – LUNA BII
IMPORTANT: It is possible to use exclusively spare parts clearly authorized and offered by LA NORDICA. In case of
need please apply to your dealer!
THE APPLIANCE CAN NOT BE MODIFIED!
13.1.

CLEANING OF THE FLUE

A correct lighting, the burning of a proper fuel, the loading of the suggested quantity of fuel, the right adjustments of
the secondary air control, the sufficient draught of the chimney and the presence of air for the combustion, are
essential for the good operation of the appliance.
The appliance should be completely cleaned at least once a year or every time it is needed (in case of bad working
and low yield).The cleaning must be carried out exclusively with cold equipment.
This operation should be carried out by a chimney sweeper who can simultaneously perform an audit of the flue
(checking of possible deposits). During the cleaning, it is necessary to remove from the appliance the ash drawer
and the smokes pipes. It is possible to clean the space for the collection of smokes from the hearth or through the
smoke exhaust, by using a brush and a vacuum cleaner. Once the cleaning has been completed, the same has
to be positioned back in its seat.
13.2.

CLEANING OF THE GLASS

Thanks to a specific entry of the secondary air the building of deposit on the glass of the door is slowed down in a
remarkable way. However the building of this deposit cannot be avoided with the use of solid fuels such as wet wood,
and this is not to be considered as a defect of the appliance.
IMPORTANT: The cleaning of the sight glass must be carried out only and exclusively with cold appliance to
avoid the explosion of the same.
Do not use cloths, abrasive or chemically aggressive products by cleaning the hearth glass.
The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air
regulator, enough draught of the chimney-flue and the presence of combustion air are the essential elements for the
optimal functioning of the appliance and for the cleaning of the glass.
BREAK OF GLASSES:
Considering that the glasses are manufactured in glass-ceramic and resistant to heat shock up to 750 °C, they
are not subject to thermal shocks. Their break can be caused only by mechanic shocks (bumps or violent
closure of the door, etc.). Therefore, their replacement is not included in the warranty.
13.3.

CLEANING OF THE ASH-DRAWER

All the appliances are equipped with a hearth grate and an ash drawer for the collection of
the ashes (Picture 8 pos.A).
It is suggested to empty periodically the ash drawer and to avoid it fills completely in order
not to overheat the grate. Moreover, we recommend leaving always 3-4 cm of ash in the
hearth.
ATTENTION: The ashes removed from the hearth have to be stored in a container made
of fire-resistant material equipped with an air-tight cover.
The container has to be placed on a fire-resistant floor, far from flammable materials up to
the switching off and complete cooling.
13.4.

MAJOLICAS

LA NORDICA has chosen majolica tiles, which are the result of high-quality artisan work and therefore the majolica
may present crackles, speckles, and shadings. These characteristics certify their precious origin.
Enamel and majolica, due to their different coefficient of dilatation, produce microcrackles, which show their authentic
feature.
For the cleaning of the majolica we suggest using a soft and dry cloth; if you use a detergent or liquid, the latter might
soak in and make the crackles more visible.
INSTRUCTION FOR LUNA BII TILES ASSEMBLY – Picture 9
1- Remove the four screws (A) placed on the upper part of the stove under the cap in cast iron.
2- Place the metal cap (B) in correspondence of the four holes and fix it with the screws (A) previously removed.
3- Place the lower tile (C)
4- Hook the upper tile (D) on the supports (E).
5- Insert the three side tiles (F) in one side, starting from the bottom and hooking the supports (G) in
correspondence of the side supports (I). For this operation do not use the hooks (N).
6- Repeat the previous operation on the opposite side of the stove.
1191015 – EN
A
Picture 8
25