Becker Centronic TimeControl TC4410 Notice De Montage Et D'utilisation page 47

FUNCTION
ROLLER SHUTTER/BLIND, INITIAL OPERATION
(Shutter/blind selection, date of initial operation)
FUNCTION
ROLLER SHUTTER/
BLIND
Press the MENU button.
1.
To select the FUNCTION menu, press the + button until FUNCTION ap-
2.
pears.
Press OK to confirm. ROLLER SHUTTER/BLIND appears.
3.
4. You can choose between roller shutter/blind using the +/- button.
Press OK to confirm. EXPERT MODE OFF/ON appears.
5.
The desired setting can be selected using the +/- button.
6.
Confirm your selection by pressing OK. INITIAL OPERATION appears.
7.
Confirm by pressing OK. FUNCTION appears.
8.
Press the MENU button to switch to operating mode
9.
EXPERT MODE
OFF/ON
INITIAL
OPERATION
FUNCTION
de
en
fr
nl
47