Becker Centronic TimeControl TC4410 Notice De Montage Et D'utilisation page 41

PROGRAMME
SEPARATE (UP/DOWN command -> switching times)
Note
At first, use the group button to select the desired channel in operating
mode.
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until PROGAMME ap-
pears.
3. Press OK to confirm.
4. Press the + button again until SEPARATE appears.
5. Press OK to confirm.
6. Now set the SWITCHING TIME s and the SWITCHING TIME t for Monday - Friday
(1-5) and Saturday and Sunday (6,7) using the +/- buttons.
Confirm every selection by pressing OK.
7. Press the MENU button to switch to operating mode.
de
en
fr
nl
41